Search This Blog

2021/12/07

Simulation HYSYS EDR

 

Design a shell and tube 

see the simulation design shell and tube using kerosene 42 API and crude oil 34 API   

The problem :


Design a shell and tube exchanger for the following duty 20,000 kg/h of kerosene (42 APO leaves the base of a kerosene side stripping column at 200°C and is to be cooled to 90°C by exchange with 70,000 kg/h light crude o (34 API) coming from storage at 40°C The kerosene enters the exchanger at a pressure of 5 br and the crude oil at 6.5 bar. A pressure drop of 0.8 bar is permissible on both streams Allowance should be made for fouling   factor of 0.0003 (W/m on the crude stream and 0.0002 (W/m C) on the kerosene stream.





see simulation 

ss

 

at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

NGL Fractionation 2

Feed part2 Feed Characteristics Pressure (kPa) 5000 Temperature 25 (°C) Molar Flow (kgmol/hr) 2988 Feed Composition Nitrogen 1.49E-02 CO2 2....

  • Fluid Package in Hysys
    Physical Properties: Fluid Package .Property Package Selection -       .Plenty of packages -       . Each has its specification-        .Typ...
  • Design of Heat Exchanger ASPEN Shell & Tube Exchange
       Design of Heat Exchanger  V10 An example:    Design an exchanger to sub-cool condensate from a methanol   condenser  from 95°C to  40°C....
  • Simulation HYSYS EDR
      Design a shell and tube  see the simulation design shell and tube using kerosene 42 API and crude oil 34 API    The problem : Design a she...