Search This Blog

2021/12/08

Shell and Tube heat Exchanger Simulation on Aspen hysys



Heat Exchanger 


Heat Exchanger Hot water at 500°C and 2000psig is used to heat cold stream of water in a shell and tube heat exchanger. The inlet temperature and pressure of the cold stream is 50°C and 260psig, respectively. The outlet temperature of the cold and hot streams are 300°C and 360°C, if the flow rate of the hot stream is 100kg/h, determine the flowrate of the cold stream passing throughout the exchanger

see simulation



 

at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

NGL Fractionation 2

Feed part2 Feed Characteristics Pressure (kPa) 5000 Temperature 25 (°C) Molar Flow (kgmol/hr) 2988 Feed Composition Nitrogen 1.49E-02 CO2 2....

  • Fluid Package in Hysys
    Physical Properties: Fluid Package .Property Package Selection -       .Plenty of packages -       . Each has its specification-        .Typ...
  • Design of Heat Exchanger ASPEN Shell & Tube Exchange
       Design of Heat Exchanger  V10 An example:    Design an exchanger to sub-cool condensate from a methanol   condenser  from 95°C to  40°C....
  • Simulation HYSYS EDR
      Design a shell and tube  see the simulation design shell and tube using kerosene 42 API and crude oil 34 API    The problem : Design a she...